4 MENU SWITCHES5 PREPARATION
Preparing this unit for recording or playback.
4-2 Menu switch details
q: Factory setting502 CHARACTER V.POSITIONCH-1/3OPERATEON/OFF
(00):The number in the bracket shows the set value on theDetails: Moves the display position of the tape VIDEO CASSETTE RECORDER BR-DV600U [OPERATE] button
counter display.counter on screen, etc. vertically.
Setting:REC LEVELEJECT
397 FAN STOP SHUTDOWN
0 (00) The display position can be moved in[EJECT] button
Details: Sets whether or not VCR operation continuesMENUADVANCE PRESET
q1 (01) 12 steps from 0 to 11. When the No. 504CH-2/4RECPLAY PAUSE
if the fan motor stops.:<INFORMATION SELECT> menu switch isSHIFTSHIFTHOLDSHIFTA. DUBCH 1/3403020100OVERdBAUTO OFFDEWREMOTE
Setting:CH 2/4OVERSERVORF
11 (11) set to OMODE + TIME>, setting to O0� is notAUD32kLOCKSPSELECTSETLOCAL48kSLAVEPBNDFHOLD
qENABLE (00): The power turns off about 1 minuteMENUHMSFREW STOPFF
possible.PHONESMONITOR OUTPUT COUNTERMIC
after the fan motor stops.LCH-1/2CTL
*The tape remaining time indicationMIXRMIXTCCH-3/4UB
DISABLE (01): The VCR continues operationposition on screen can be changed up andAUDIO
even after the fan motor stops.
down with this switch.
When the fan motor stops, press
the [OPERATE] button as soon as
possible to turn the VCROs power504 INFORMATION SELECT
off. If not, a malfunction may occurDetails: Selects which information is displayed on[AUDIO MONITOR] switch
due to overheating.the on-screen display.
Setting:
TIME (00):Time data is displayed
414 TCG SELECT
qMODE+TIME (01):Time data and tape running
Details: Selects the time code generator mode.
mode are displayed.
Setting:Turn the power ON.Loading/unloading a cassette
qPRESET (00): Engages the Preset mode.
REGEN (01): Engages the Regen mode.505 REMAIN ENABLEPress the [OPERATE] switch. The counter display lightsInsert the cassette into the cassette loading slot with the
Details: Selects whether or not the tape remainingup.window facing up. Push the cassette in slowly until the
time is shown on the on-screen display.loading mechanism starts automatic loading.
415 TCG MODE
Setting:[ The VCR enters the Stop mode and the cassette
Details: Selects the time code generator Run mode.
qOFF (00):Remaining time is not shown.Turn the power OFFindicator ( ) lights.
Setting:
ON (01): Remaining time is shown.FREE RUN (00): Engages the Free Run mode.
qREC RUN (01): Engages the Rec Run mode.Press the [OPERATE] switch. OoPF-oFF� is shown in thePress the [EJECT] button to eject the cassette.
514 TIME DISPLAY SELECTcounter display.[ The cassette tape is ejected.
Details: Selects the type of time data displayed.416 NON DROP/DROP (U MODEL)
Setting:
Details: Selects the time code generator Drop Frame
DATE (00):Shows the date.Audio monitor selection
mode.
CLOCK (01):Shows the time.
Setting:DATE+CLOCK (02):Shows the date and time.Use the [AUDIO MONITOR] switch to select the audio
qDROP (00):Engages the Drop Frame
qTC (03):Shows the time code data.channel to monitor (via the [AUDIO MONITOR OUT]
mode.
NON DROP (01): Engages the Non-Drop Frameconnectors).
mode.516 DISPLAY SELECT
Details: Selects the type of data displayed on the
tape counter in the LCD display.
500 ON SCREEN
Setting:Details: Selects whether or not the on-screen display
qTC (00):Shows the time code data.
is shown on the monitor.
CLOCK (01): Shows the date and time. You can
Setting:
switch between date and time with
OFF (00):The display is not shown.
the [COUNTER] switch.qON (01): The display is shown.
501 CHARACTER H.POSITION
Details: Moves the display position of the tape
counter on screen, etc. horizontally.
Setting:
q0 (00) The display position can be moved in
:9 steps from 0 to 8. The factory setting is
8 (08) O0� (the display position at the far right).
*The tape remaining time indication
position cannot be changed.
2021 |