EDIT
Using a non-linear editing system
Tape contents of BR-HD50 are captured by a non-linear editing system and the non-linear edited con-
tents are recorded on BR-HD50.
Connection
Analog video
VIDEO OUTAnalog audio
AUDIO OUT
RS-422A
REMOTE
IEEE1394 terminalNon-linear system
IEEE1394 (image, audio, control)
Control with RS-422AControl with the IEEE1394 ter-
(Analog signals)minal (Digital signals)
SettingSetting
? Set the REMOTE/LOCAL switch on the? Set the INPUT SELECT switch located
front panel to REMOTE.on the front panel to HDV/DV.
? REMOTE [1/2] Menu screen? Set the IEEE1394 switch located on
? Set REMOTE SEL 9-PIN to ?ON?.the front panel to match the video for-
? REMOTE [2/2] Menu screenmat.
? Set to DV position for DV mode, and to
z REMOTE FF/REW MODE:
Use this item to select the operation to be per-HDV position for HDV mode.
formed if the FF or REW command is received? Set the REMOTE/LOCAL switch on the
during playback. (FF/REW or Search)front panel to the position matching
If the search operation is not performed prop-the REMOTE menu below.
erly, set it to ?SEARCH?.
z CONTROLLER TYPE (in the REMOTE [2/2]? REMOTE [1/2] Menu screen
? Set REM SEL HDV/DV to ON or LOC+REM.
Menu screen):Set this item to ON if it is to become
Set this item to ?TYPE1?.
enabled only when the REMOTE/LOCAL
switch on the front panel is set to REMOTE.
Set this item to LOC+REM if it is to become
enabled regardless of the position of the
REMOTE/LOCAL switch.
Memo
z If the time code of BR-HD50 is not displayed correctly when the non-linear side moves one frame
forward or backward, set the STL/F.ADV: DV in the SYSTEM [1/2] Menu screen to ?FRAME.? (In DV
mode only)
z When controlling with RS-422A using the HDV format, only the capture operation is supported.
E-63 |