RECORDINGPLAYBACK
Recording with SERIAL REMOTE terminalsPlayback settings
Recording can be turned ON/OFF with a serial remote controller or foot switch connected to the serial
remote terminal located at the rear panel of BR-HD50.Video settings
This unit plays back tapes recorded in HDV, DV,
Setting VIDEO Menu screen
or DVCAM format. (SP mode only)
? Selecting video format for HDMI OUT
terminal and COMPONENT OUT terminal
z OUT FORMAT [60]/[50]
Select the playback image format to output
from the HDMI OUT terminal and the COMPO-
SERIAL
NENT OUT terminal. (Cross converter video)
REMOTE/LOCAL switchREMOTE
[Settings [60]: NATIVE, 480I, 480P, 1080I, 720P]
?Serial remote controller
[Settings [50]: NATIVE, 576I, 576P, 1080I, 720P]
?Foot switch
REMOTE [1/2] Menu screen? Automatic selection of HDMI OUT ter-
Connection
???REMOTE [ 1 / 2 ] ???When playing back tapes recorded in HDV orminal video output
The serial remote controller can be connected to the SERIALREMOTE SEL 9PONDVCAM format, the front panel HDV or DVCAM
REMOTE SEL SERONz MONITOR SELECT
REMOTE terminal located on the rear panel of BR-HD50.REM SEL HDV / DVONindicator is lit.
LOCAL FUNCT IONSTP+EJTTo automatically match the playback image
PREROLL7SECformat output from the HDMI OUT terminal to
SettingNEXT PAGE? Selecting playback video format
PAGE BACKthe video format of the connected display, set
Set whether to automatically detect the video
? To use the SERIAL REMOTE terminal, set REMOTE
format for playback, or to select a specific for-this menu item to HDMI[A].
SEL SER in the REMOTE [1/2] Menu screen to ON or[Settings: HDMI[A]/OUT FRMT]
mat, using PB TAPE FORMAT on the SYS-
LOC+REM. Then, set the REMOTE/LOCAL switch on
TEM [2/2] Menu screen.? Screen display style for up/down-con-
the front panel accordingly.Memo[Settings: AUTO, DV, HDV, DVCAM]
z Besides recording, the serialverter video
z REMOTE SEL SER(Details: XPage 69)
remote controller can per-z DOWN CONV. MODE
ON:When the REMOTE/LOCAL switch is set to
? Setting IEEE1394 terminal outputThe HDV signal is a wide-screen video signal.
REMOTE, operations can be performed via theform other functions.
SERIAL REMOTE terminal.z If the REMOTE SEL SER is setvideo formatWhen playing a tape recorded in HDV format,
the output from the LINE OUT terminal and Y/
LOC+REM :With the REMOTE/LOCAL switch is set either way,to ON, unit buttons that can beSet the IEEE1394 terminal output video format
operations can be performed via the SERIALoperated can be selected fromto HDV or DV.COUT terminal will be down-converted play-
REMOTE terminal. With this setting, the buttonsLOCAL FUNCTION in theSet the IEEE1394 switch on the front panel,back images (480i/576i).
and switches of the unit can be used too.REMOTE [1/2] Menu screen.according to the playback video format.Set the style for displaying the down-con-
verted playback image on a display with a 4:3
? SetFOOT SW in the REMOTE [2/2] Menu screen accord-HDV:Use this setting when the playback tape
REMOTE [2/2] Menu screenvideo format is HDV.aspect ratio.
ing to how the SERIAL REMOTE terminal is used.
???REMOTE [2/2] ???DV :Use this setting when the playback tapeThis will also apply to down-converted play-
OFF:Set to OFF when the serial remote controller isREM FF / REW MODEFF / REWback images (480i/576i) output from the COM-
used. The footswitch cannot be used.REM STOP SEL .EEvideo format is DV or DVCAM.
PB START DELAY0FPONENT OUT terminal.
L EDGE :Recording and recording pause is switched at theSYNCHRON I ZAT I ONONMemo
CONTROL LER SELTYPE1[Settings: SQUEEZE/LETTER BOX/SIDECUT]
LOW edge of the footswitch signal.FOOT SWL EDGEz When playing back a tape recorded in HDV
PAGE BACK
H EDGE :Recording and recording pause is switched at theformat, match the unit HD signal format (60Hzz UP CONV. MODE
HIGH edge of the footswitch signal.or 50Hz) to the playback signal format.Up-converts DV/DVCAM recorded tape play-
L LEVEL :Recording is performed at the LOW edge andback signals, and sets the video mode for out-
(XPage 40 ?Selecting HD signal format?)
paused at the HIGH edge of the footswitch signal.put from the COMPONENT OUT terminal.
z Playback output signal format: XPage 34
Foot switch[Settings: FULL/SIDE P.]
Operation
Signal? Setting analog signal setup (U model
Before using the foot switch, set BR-HD50 to the RECORDING or
Honly)
RECORDING PAUSE mode using the relevant buttons of the unit.Serial IN
(Only with L EDGE and H EDGE)terminalz SET UP [60]: DV
L400msSet enabling or disabling the application of set-
Min
Memoups to analog video signals (composite, Y/C
z The foot switch can only be used to switch between RECORD-separate, and SD component).
ING ON and OFF.
z The foot switch can be operated regardless of the setting of the
REMOTE/LOCAL switch.VIDEO menu details: XPage 73 to 75
E-48E-49 |
ACEC
