MENU SCREENS
Description of the Menu screens (continued)
? REMOTE [2/2] Menu screen
REMOTE Menu screens
ItemSettingDescription
The REMOTE Menu consists of the following two screens (1/2 and 2/2).
REM FF/REW EFF/REW (00)For setting the action to be performed when the REMOTE termi-
? REMOTE [1/2] Menu screenMODESEARCH (01)nal or IEEE1394 terminal received an FF/REW command:
ItemSettingDescription(0205)FF/REW :Sets BR-HD50 to perform FF/REW when an FF/REW
command is received. Normal setting.
REMOTE SEL OFF (00)For enabling/disabling the REMOTE terminal when the REMOTE/SEARCH :Sets BR-HD50 to perform searching when an FF/
9PEON (01)LOCAL switch on the front panel is set to REMOTE.REW command is received. Use this setting if the
(0200)OFF :Control through RS-422A disabled.search (cue up) function does not work properly.
ON :Control through RS-422A enabled.
REM STOP SEL EEE (00)For setting the action to be performed when the REMOTE termi-
REMOTE SEL OFF (00)For enabling/disabling control via the SERIAL REMOTE terminal.(0206)PB (01)nal received a STANDBY-ON command:
SER EON (01)OFF:Control disabled regardless of the settings of theEE:Sets BR-HD50 to the EE mode. (It goes into the STOP mode.)
(0201)LOC+REM (02)REMOTE/LOCAL switch.PB:Sets BR-HD50 to the PLAY mode. (It goes into the STILL mode.)
ON:Control enabled only when the REMOTE/LOCAL
switch is set to REMOTE.PB START E0F (00)For adjusting the edit timing. With the remote controller in use, if
DELAY |the start points of edit are not concurrent, adjust the playback
LOC+REM :Control enabled regardless of the settings of the
REMOTE/LOCAL switch.(0207)9F (09)startup timing:
10F (0A)0F:No correction.
REM SEL OFF (00)For enabling/disabling control via the IEEE1394 terminal. |1F to 15F :Delays the timing by the number of frames set by the
HDV/DVEON (01)OFF:Control disabled regardless of the settings of the15F (0F)user. When BR-HD50 is connected to an editing
(0202)LOC+REM (02)REMOTE/LOCAL switch.remote controller with no bump function, use this set-
ON:Control enabled only when the REMOTE/LOCALting to adjust the editing precision.
switch is set to REMOTE.SYNCHRONI-OFF (00)For enabling/disabling the bump function when BR-HD50 is con-
LOC+REM :Control enabled regardless of the settings of the
ZATION EON (01)nected to an editing remote controller:
REMOTE/LOCAL switch.(0208)OFF:No synchronization.
LOCAL NO KEY (00)For selecting the buttons of BR-HD50 to be enabled in remote-ON :Performs synchronization. The editing precision is
FUNCTION EJECT (01)controlling it with the REMOTE terminals or the SERIAL REMOTEenhanced. Please set the pre-roll time to at least 7 seconds.
(0203)ESTP+EJT (02)terminal:CONTROLLER ETYPE1 (00)For setting the type of controller to be connected when remote
ALL KEYS (03)NO KEY:No button enabled.SEL TYPE2 (01)control is enabled with the RS-422A interface:
EJECT:Only the EJECT button enabled.(0209)TYPE3 (02)TYPE1 :RM-G820
STP + EJT :Only the STOP button and the EJECT button areTYPE4 (03)TYPE2 :RM-G860 (set the preroll time to at least 10 seconds)
enabled.TYPE5 (04)TYPE3 :AG-A850
ALL KEYS :All operation buttons are enabled.TYPE6 (05)TYPE4 :RM-450, PVE-500
MemoTYPE7 (06)TYPE5 :FXE-100, FXE-120
If OPERATION LOCK in the SYSTEM [2/2] Menu screen is set toTYPE6 :(Not in use)
ON, the buttons on BR-HD50 will be disabled regardless of theTYPE7 :Avid Xpress DV, Canopus
setting here.DV Rex-RT Professional
PREROLL 3SEC (00)For setting the preroll time of BR-HD50 in remote-controlling itFOOT SW EOFF (00)For setting when an external switch (e.g., a footswitch) is con-
(0204)5SEC (01)with the REMOTE terminal. Setting done with the editing remote(020A)L EDGE (01)nected to the SERIAL REMOTE terminal. Before operating an
E7SEC (02)controller prevails over other settings:H EDGE (02)external switch (footswitch) with L EDGE or H EDGE, turn BR-
10SEC (03)3SEC :3 seconds7SEC : 7 secondsL LEVEL (03)HD50 to the RECORDING PAUSE or RECORDING mode:
5SEC :5 seconds10SEC: 10 secondsOFF:For when the external switch is not used.
L EDGE :Recording and recording pause is switched at the
MemoLOW edge of the external switch signal.
To enhance editing precision, please set it to at least 7 seconds.
H EDGE :Recording and recording pause is switched at the
NEXT PAGEFor displaying the REMOTE [2/2] Menu screen.HIGH edge of the external switch signal.
L LEVEL :Record at the LOW edge and pause recording at the
PAGE BACKFor returning to the TOP Menu screen.HIGH edge of the external switch signal.
PAGE BACKReturn to the REMOTE [1/2] Menu screen.
E-70E-71 |